|Model||OR-G 13025 ?>|
|X axis positioning accuracy||±0.05mm|
● Zero deformation
The high-strength steel plate welding bed uses groove welding process to achieve equal-strength welding (butt joint) between steel plates. The mechanical properties of the welded joint (especially the tensile strength) are equivalent to that of the base metal. The welded joint is annealed by internal stress after it does not tear. Craftsmanship to ensure that the bed is sturdy and durable with zero deformation
● High precision
The average thickness of the steel plate overweight welded bed is greater than 25mm;
The support surface of the Y-axis guide rail of the bed is made of 35mm thick steel plate;
Maximum guarantee of cutting accuracy and stability.
Light curtains are installed on the front and rear sides of the aviation aluminum beam to provide 360° protection;
Waterproof, dustproof, anti-interference, the light curtain has high sensitivity and strong reliability;
One-click to open the security protection;
Ensure the safety of workers when the machine is working normally;
The platform blade support adopts a modular design, which is easy to disassemble and clean.
The waste collection device at the bottom of the platform adopts an integrated waste collection module, which is convenient and quick to clean and remove the slag.
Optimize the dust removal function of the original zone, especially set up a smoking pipe on the outside of the bed;
The irritating high-temperature smoke generated in the cutting area is uniformly collected by the flue outside the bed, and discharged after dust reduction treatment;
The bed cools quickly and is durable;
The cutting area is well sealed, and the smoke and dust are removed more thoroughly.
|OR-G 13025||OR-G 14032|
|X axis positioning accuracy||±0.05mm||±0.05mm|
|Y axis positioning accuracy||±0.1mm||±0.1mm|
|Z axis positioning accuracy||±0.03mm||±0.03mm|
|OR-G 13025||OR-G 14032|
|X axis positioning accuracy||±0.0019685inch||±0.0019685inch|
|Y axis positioning accuracy||±0.003937inch||±0.003937inch|
|Z axis positioning accuracy||±0.0011811inch||±0.0011811inch|
The high-strength steel plate welding bed uses groove welding process to achieve equal-strength welding (butt joint) between steel plates. The mechanical properties of the welded joint (especially the tensile strength) are equivalent to that of the base metal. The welded joint is annealed by internal stress after it does not tear. Craftsmanship to ensure that the bed is sturdy and durable with zero deformationMore Details
The laser head is made of high-quality materials in accordance with advanced technology. It is strong and durable. It can achieve "online" measurement during the production process, and the measurement is accurate and rapid.More Details
CypCut plane cutting software is a set of software specially developed for the deep customization of the laser cutting industry, easy to use, rich in functions, suitable for various processing occasions.More Details
Provide quide rail fine-tuning function to ensure that the guide rail is always leve with the bedMore Details
● Siemens motor, Ultra-high negative pressure fan;
● TORAY filter system;
● Visual human-machine interface (HMI);
● Industrial exterior design;
● Self-developed control system:
● Supporting EtherCAT bus, Frequency conversion energy-saving control.
Laser protective glasses prevent or reduce laser damage to the human eye.
The power of each laser can be changed according to the specific cutting requirements. In this way, one machine can meet a variety of cutting requirements and achieve the effect of multi-purpose.
The machine is equipped with an exchanged double working platform. While working on one table, the other platform can load and unload the sheet workpiece.