Application introduction

Laser Cutting Foam & Filter Mats

Foams made of polyester (PES), polyethylene (PE) or polyurethane (PUR) are well suited for laser cutting, laser engraving and laser marking. Foam is used for suitcase inserts or padding, and for seals. Apart from these, laser cut foam is also used for artistic applications, such as souvenirs or photo frames, for example

Suitable metals for laser marking and engraving

  • Film materials suitable for laser cutting
    Polyethylene (PE)
  • Polyester (PES)
    Polyurethane (PUR)

Would you like more information about laser marking and laser engraving metals?

Contact Us

WHICH METAL PRODUCTS DO YOU WANT TO MARK?

INDUSTRIAL LASER MARKING

Examples of applications

What is special about laser cutting of foam?

The laser is a highly flexible tool: Everything is possible, from prototype construction through to series production. You can work directly from the design program, which is very important especially in the area of rapid prototyping. Compared to the complex water jet cutting process, the laser is significantly faster, more flexible and more efficient. Foam cutting with a laser machine will produce cleanly fused and sealed edges.

 

Industrial laser marking: Examples of applications

What is the point of buying a laser for industrial metal marking?

  • Do I have to fixate the material on the working surface?

    No. The laser does not exert any pressure on the foam during the process, clamping or any other type of fixation is therefore not required. Simply insert the workpiece and start the laser process. This saves time and money during the preparation of the material.


     

    Contact Us

Function and advantages of laser technology

  • Function of the Fiber Laser Cutting Machine

    The fiber laser cutting machine can be used for both plane cutting and bevel cutting, and the edges are neat and smooth, which is suitable for high-precision cutting of metal sheets. It is an energy-saving and environmentally friendly new products with space saving and gas consumption and high photoelectric conversion rate.

    • Advantages of a Oree laser

    • Excellent beam quality and good cutting quality

    • Fast cutting speed and high production efficiency

    • No burr in the cutting, high cutting precision

    • Auto focus, easy to operate and maintain

    • Very low cost of use, cost-effective

    • Closed design, safe and pollution free

    • Fast cutting speed and high production efficiency


  • Function of the CO2 laser cutting machine

    The CO2 laser cutting machine adopts a focusing mirror to focus the CO2 laser beam on the surface of the material to melt the material, while blowing the melted material with a compressed gas coaxial with the laser beam, and moving the laser beam and the material relative to each other along a certain trajectory to form a slit of a certain shape

    • Advantages of a Oree laser

    • The output continuous laser is to make the cutting section smoothest.

    • The laser cutting head does not contact with the surface of the material and no damage to the workpiece.

    • Can cut non-metallic materials and has a wide cutting range.

    • No need for molds, saving production costs.


  • Function of the fiber laser marking machine

    Fiber laser marking machine, with the good beam quality. Its output center is 1064nm, the whole machine life is longer about 100,000 hours, compared with other types of laser markers. The electro-optical conversion efficiency is more than 28%, relative 2%-10% conversion efficiency of other types of laser marking machine. Besides that it has outstanding performance in energy saving and environmental protection.

    • Advantages of a Oree laser

    • Can process a variety of metal, non-metallic materials.

    • Belonging to non-contact processing, no damage to the product, no tool wear, good marking quality.

    • Thin laser beam is thin, small processing material consumption and the processing heat affected zone.

    • High processing efficiency, computer control, easy to automate


OREE LASER Product Recommendations

The data are for reference only

What is special about laser cutting of foam?

The laser is a highly flexible tool: Everything is possible, from prototype construction through to series production. You can work directly from the design program, which is very important especially in the area of rapid prototyping. Compared to the complex water jet cutting process, the laser is significantly faster, more flexible and more efficient. Foam cutting with a laser machine will produce cleanly fused and sealed edges.

 

See more features

Do I have to fixate the material on the working surface?


No. The laser does not exert any pressure on the foam during the process, clamping or any other type of fixation is therefore not required. Simply insert the workpiece and start the laser process. This saves time and money during the preparation of the material.